Video of dispensing

Dispensing solder paste (Type 9) with a 50μm-width to mount a 0402 chip on a board

Patterning silver paste in a square shape with a 100μm-width to fill a 1-mm square.

Dispensing a constant amountφ40μm flux onto a φ50μm pad to mount a minute solder ball.

Dispensing light-shielding resin onto the side of glass without overflowing it to surface or back side, even though the glass shape is irregular.

The jet dispensing technology not requiring wiping of an emblem without overflowing any paint.

High-speed dispensing solder paste (type 7) without contacting it (Dot diameter = φ160μm, 100 dots/second)

The Spiral coater can coat paint in a 10-mm straight line without scattering or protruding it.

Metallic paint can be coated onto the area you want to coat only, so it does not any masking.

The Spiral coater coats thin film over the entire surface with rotating the roll without scattering around.

For inquiries by telephone

+81-263-88-9611

For inquires by e-mail

Downloading a catalogue